Distributed and Serviced By:
A Tech Authority, Inc.
13745 Stockton Ave.
Chino, CA 91710
(909) 614-4522
www.atechauthority.com

KGM 181 by HEIDENHAIN

The KGM Grid Encoder is for performing circular interpolation tests with small radii and curved path tests, to inspect primarily the dynamic performance of a control

Owners and manufacturers of machine tools need measuring systems that provide detailed information on machine accuracy with a minimum of time spent on mounting and adjustment. The following measuring systems can satisfy these requirements:

The KGM Grid Encoder is for performing circular interpolation tests with small radii and curved path tests, to inspect primarily the dynamic performance of a control

Measuring standard - Two-coordinate TITANID phase grating on glass (grid)
Signal period - 4 Ám in both directions
Coefficient of thermal expansion - atherm= 8 ppm/K
Measuring range Dia. - 140 mm
Accuracy grade - ▒ 2 Ám
Evaluation electronics - PC counter card IK 121 V (included)
Evaluation Software - ACCOM for AT compatible PCs
Recommended measuring steps - 1 Ám, 0.1 Ám, 0.01 Ám

To connect this measuring system to a PC, HEIDENHAIN offers the IK121 and IK220 counter cards for insertion in AT-compatible PCs.

HEIDENHAIN offers ACCOM Evaluation Software for PCs for measured value acquisition and evaluation according to ISO 230-2 and 230-4 as well as the VDI/DGQ directive 3441. Accom 2.5.3 runs on all AT-compatible PCs: IK121 (W95/98/ME) or IK220 (W95/98/ME/2000/NT4.0).