Atech-Authority Logo
Distributed and Serviced By:

A Tech Authority, Inc.
13745 Stockton Ave.
Chino, CA 91710
(909) 614-4522
atechauthority.com

Renishaw NC3 Tool Setter and Detector for Machining Centers - Printable
angular-encoders

The Renishaw NC3 is a compact 2 axis non-contact tool setting probe, with broken tool detection capability.

The Renishaw NC3 is a compact 2 axis non-contact tool setting probe, with broken tool detection capability. Tools as small as Ø0.2 mm can be measured anywhere along the laser beam and set-up is more simple than focused laser systems as there is no focal point to identify. The NC3 offers the following features…

  • High repeatability (±0.15)
  • Low air consumption
  • Rapid tool-breakage detection
  • Compact design 135mm x 26mm x 77mm
  • Measurement of tools of Ø0.2mm and larger
  • Broken tool detection of tools as small as Ø0.1mm.
  • Sealed to IPX8 with air on
  • Single conduit exit from product
  • Drip rejection mode
Copyright© 2022 A Tech Authority. All Rights Reserved.
faceBook youtube linkedIn