RCN 5380 by HEIDENHAIN
New absolute angle encoder with a 35mm through hole shaft, providing accuracies of +/-5 arc seconds. A laser calibration chart comes with this encoder.
click here for more images
 RCN angle encoders feature an integral bearing, a hollow shaft and a stator coupling. The measured shaft is directly connected with the shaft of the angle encoder. Absolute angle encoder with a 35mm diameter hollow through shaft, EnDat 2.2 interface, 26 or 28 bits, 1Vpp signal, mechanical speed >1500 min, IP64, disconnectable cable. Other through hole shafts diameters are available (20mm, 35mm, 60mm, and 100mm).
|
|
|
Share this item on Facebook
|
ATA Mail
