Products : Digital Readouts : Displays : Wizard 450L

This product has been discontinued by the manufacturer however parts may still be available
Click HERE to view the replacement item

Wizard 450L by Anilam

The Wizard 450L is a special lathe version with turning features including, tool length offsets and taper checking.

            click here for more images
With the axis coupling feature, two parallel axes can move independently and the true position be summed up. Wizard 450L also has constant surface speed control (CSS) as an option.

EverTrack- Additional precision grating on the RBS and RBM linear encoders ensure permanent position tracking. The position will never be lost due to power interruptions.

Radius/Diameter Mode- The console can display the position either as a radius or diameter, an invaluable feature for

Machine Error Compensation- Machine mechanics are never exact. A correction factor can be set for each axis independently. Just move the axis a known distance, input what it should have been and the wizard will automatically make the necessary correction. Correction is linear in Wizard 211 and can vary over four segments in other models.

Absolute/Incremental Mode- This feature allows positioning using either an absolute datum or the last position as reference for subsequent moves. Selectable with a single key stroke.

Interactive Message Display- The Wizard will calculate actual feed-rate and display here, or the job clock can be read. Also in this display, the Wizard will prompt for data input, making the most demanding operations easy to set up. With the built in help utility, the Wizard will tell the operator what the proper F-codes are.

Bolthole Patterns- Bolthole patterns are often symmetric. The Wizard 450 will automatically calculate all the positions for circular, linear, array or frame patterns, from a minimum of data entry. Only the centerpoint, diameter and number of holes are required for a full circular hole pattern with up to 360 holes.

Tool Length Offsets- The Wizard 450L will keep track of tool length offsets, so there is no need to redatum tools.

Axis Coupling- When there are two slides on the same axis, the Wizard 450L will couple the two positions
together. The operator can use the slides independently and the Wizard 450L will automatically calculate the true tool position.

Number of Axes- 2, or 3
Housing- Die-cast
Configurable axis designation
Display resolution- .0005/.0001/.0002/.0005/.001 inch
Support inch-grating encoders
Inch/Metric conversion
Absolute/Incremental mode
Radius/Diameter mode
Machine error compensation- 4-piont lin.
Mid-point calculation
Approaching zero warning- selectable
Add/Subtract calculator
Interactive message display
Help function
Feed-rate display
Job clock
Edge finder input
Tool length offsets- 99
Taper calculation
Axis coupling

Share this item on Facebook

Download a brochure on Wizard 450L in pdf format
size: 6897 KB

Download a product manual on Wizard 450L in pdf format
size: 937 KB

View other products by Anilam

Request Literature on Wizard 450L

Click here for a printable version of this page

Visit the Anilam web site

909-614-4522 Employment ATA Mail Notify Webmaster Webmaster Login
Copyright © 2018. A Tech Authority. All Rights Reserved!