HR 410 by HEIDENHAIN
Portable electronic handwheel with Keys for the selection of 5 axes
Keys for traverse direction
Keys for 3 preset feed rates
Key for actual-position capture
Three keys with machine functions
Two permissive buttons (24 V)
Emergency stop button (24 V)
Magnetic holding pads
All keys are designed as snap-on keys and can be replaced by keys with other symbols.
Weight Approx. 1 kg.
Versions- HR 410 (NC start/stop, spindle start; for PLC basic program; without detent) Id. Nr. 296 469-55 HR 410 (spindle right/left/stop) Id. Nr. 296 469-54 HR 410 (NC start/stop; without detent) Id. Nr. 535 220-05